Their wires are very sensitive, and you must know how to keep your headphones from getting tangled because we often roll them irregularly after using and during untangling, they often get damaged and expires
So must keep following these tricks to prevent them from coiling and increasing their life span. Let us start!
Tricks For Preventing Tangling of Headphones
You can use many ways to prevent the coiling of wires; however, some of them are difficult to execute, but let’s move towards the easy ways.
The following 11 tricks are the easiest and the most effective tips for avoiding the coiling of wire and knowing how to keep your headphones from getting tangled. Let us study them in detail one by one
1. Make 8
Major tangling problems arise from our carelessness as we do not keep them organized; instead, we make their roll like usual strings and throw them anywhere after using them.
So to avoid their tangling take their wires and wrap them on your fingers in alternate ways such that digital 8 is created. However, must leave some cord at the end because you can use it for holding the digit 8.
So, wrap the piece of cord at the center of eight and fix it firmly at its place. So this is how to keep your headphones from getting tangled.
2. Make Twirl of Wires
If you do not know how to make 8 wires of wires, then try making a twirl of wires. Take one end of the wire in your hand and then turn to hold the wires from a little down and move it upwards for making the hole.
In the next step, again grab the wire such that your palm faces outside, then twirl your hand such that your palm faces inside. In this way, a second twirl will be created. Repeat these steps until all wires are in your hand, then fix these twirl with the help of a clip.
3. Make Them Un-Bendable
Soft wires tangle the most, and due to their sensitivity, we have to untangle them with much care. So its solution is to make them hard so they cannot bend easily. There are different methods that you can use to make them hard.
First of all, if you have scotch tape, wrap it all-around your earbuds; if there is no need to make them stronger, then wrap another coat of tape on the wires.
However, if you do not have tape, you can use thread that is present in all homes. So please take it and start wrapping it all around the wires. Do not sad because his process takes time, but it is worth applying.
4. Use Your Phone
One most the easiest DIY is to use your mobile phone to prevent their coiling. Whenever you stop listening to music then, do not place it anywhere else. But the better option is to keep them with mobile.
So hold your mobile and start wrapping it around your phone and, in the end, clutch its pin in the wires. In this way, your earbuds do not coil, and there will no risk of slipping of mobile from your hand because wires provide friction.
5. Use Credit Card
If you cannot wrap wires around your mobile phone because you often have to use your mobile, wires cover the screen of mobile and you feel difficulty in seeing the screen, then there is an alternative method.
If you have an expired card then, wrap the wire around it like a mobile phone and keep it in your pocket because cards are very slim, and you can easily keep them in your pocket and carry them with you.
6. Buy a Binder Clip
Above all, methods are very simple, and you do not have to invest because all these things are already available in the homes. But if you want to organize your table more and love tiny modern devices, then buy a binder clip.
So take your headphone and wrap their wires regularly, for keeping them fixed them at their place catch them with a binder clip. Please make sure that the speaker of earbuds is outside the clip because they can be damaged.
7. Use a Band
If you do not want to invest in a binder clip, you can use a hairband that is easily available in the market. So make the eight wires or wrap them in your hand, then fix the eight with the band.
However, make sure that the brand you are using is not very tight because it will break down, and your wires will coil. Moreover, please do not use an extra tight band because it can create permanent beds in the wires, and then there are high chances of their breakage.
8. Double Fold And Knot
If above mentioned all methods seem difficult, and you think they are time taking and you are on your way to finding out how to keep your headphones from getting tangled.
Then try double fold and knot methods because it is the simplest. So make a double fold of your earbuds and then tie a knot. This is all you have to do. So if you are in a hurry and do not have a binder clip, execute this method.
9. Travel Size Envelope
Some persons do not like to have bands, clips with them; moreover, they think that wires wrapped with thread or tape decrease the beauty of headphones. So for those who want to know how to keep headphones from tangling without tapes, band, there is another method.
Take travel size envelope having hard texture. Then make eight of your earbuds or twirls; however, do not fix them with any band or clip. But after organizing them, keep them in the envelope.
You can keep these envelopes at any place without any worry because wire will be secured inside the envelopes due to inhibition of contact with any other thing, and you need no worry about its coiling.
10. Use Velcro or Self-Adhesive Fabric Tape
The Binder clips break down, and the bands are hard to remove. So their alternative is velcro or self-adhesive fabric tape. Make a circular twirl or 8 headphones wires, then fix them with velcro.
So whenever you need your hands-free, then remove the velcro tape. Best of all, velcro can be used multiple times and easily available in shops at an affordable price in many colors.
11. Use Paracord
This method is just for experts who have the knowledge of wires and know how to rejoin wires. Keep in your mind that you have to cut the wires of your earbuds in this method; if by mistake you cut the wrong wires, your headphones will top working.
Follow these steps
1. First of all, separate the microphones and wires of headphones; for this, take scissors and cut the wires from an inch from the top and downside of the microphone.
2. After cutting, you will get three wires to measure each wire’s length and cut the paracord of their corresponding length.
3. Now pass each wire through paracord and seal their ends by heating with lighter carefully because wires can burn.
4. After burning off, the plastic coverings attach the wires according to color codes with the help of electrical tape.
5. No check their working; if they are working properly means that you have attached connection wisely. Now wrap them with another paracord.
6. Assemble all the parts of the headphones with the help of hot glue.
His is how you can permanently keep your earbuds from tangling, but the method is difficult and not for beginners because headphones are expensive. Your little mistake can damage them badly and waste all your investment.
In a nutshell, organize your earbuds after using them, you can use different types of tools like binder clips, and one other thing you can do is strengthen and harden their wires, so they do not tangle.
Once you start following one of the above methods, your earbuds will never coil and stay long. Thank you for visiting us!